Permabond

Permabond TA4246

Permabond TA4246 is a 2-part, no-mix, room temperature curing structural adhesive.

Permabond TA4605

Permabond TA4605 is a 2-part, 1:1 toughened acrylic adhesive. It has been developed to bond low surface energy plastics such as polypropylene and polyethylene - with no primer or surface treatment required.

Permabond TA4610

Permabond TA4610 is a 2-part, 1:1 toughened acrylic adhesive developed to bond low surface energy plastics such as polypropylene and polyethylene - with no primer or surface treatment required.

Permabond TA4611

Permabond TA4611 is a 2-part, 1:1 toughened acrylic adhesive developed to bond low surface energy plastics such as polypropylene and polyethylene. No primer or surface treatment required.

Permabond TA4550

PERMABOND® TA4550 is a 2-part, 2:1 low odour, acrylic adhesive developed for structural bonding of nylon/polyamide without the need for any primers or additional surface treatment.

Permabond TA4660

Permabond TA4660 is a 2-part, 2:1 low odour, acrylic adhesive. It was developed for structural bonding of nylon/polyamide.

Permabond A1046

Permabond A1046 is a rapid curing adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys and threaded components.

Permabond A131

Permabond A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water.

Permabond A1044

Permabond A1044 is a rapid curing sealant designed to lock and seal metal pipe connections, offering very good resistance to even the most aggressive chemicals.

Permabond MH052

Permabond MH052 seals against gas, water, LPG, hydrocarbons, oils and other chemicals and will seal to the burst rating of the pipe.

Permabond A136

Permabond A136 is an anaerobic material designed for making 'formed in situ' gaskets between metal surfaces.

Permabond A905 Aerosol

Permabond A Surface Activator (A905) is used in conjunction with Permabond A (anaerobic) adhesives and sealants.

Permabond CSA Aerosol

Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylate adhesives to promote a faster cure and to extend their gap-filling capabilities.

Permabond 102

Permabond 102 is a low viscosity general purpose plastic bonding product useful in applications or bonding closely fitting parts.

Permabond 105

Permabond 105 is a low viscosity high purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber.

Permabond 240

Permabond 240 is a high viscosity product useful in large gap applications. It is ideal for porous substrates.

Permabond 731

Permabond 731 is a toughened cyanoacrylate with very good impact and peel strength when compared to a conventional cyanoacrylate.

Permabond 737

Permabond 737 BLACK MAGIC is a toughened cyanoacrylate with  improved impact and peel strength for maximum  flexibility.

Permabond 712

Permabond 712 is a low viscosity, solvent free cyanoacrylate adhesive that shows a unique resistance underwater or in hot and wet conditions. It is suitable for continuous use up to 120°C (150°C peak).

Permabond 791

Permabond 791 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces.

Permabond 792

Permabond 792 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces.

Permabond 820

Permabond 820 is a low viscosity modified ethyl cyanoacrylate suitable for applications where high temperature resistance is required.

Permabond 910

Permabond 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts.

Permabond 920

Permabond 920 is the original allyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts.

Permabond 940

Permabond 940 is a low odour, non-fogging, non frosting alkoxy ethyl cyanoacrylate.

Permabond 2010

Permabond 2010 is a thixotropic, fast-setting cyanoacrylate particularly suitable for use on vertical and porous substrates.

Permabond 2011 Gel

Permabond 2011 is a thixotropic, fast-setting cyanoacrylate particularly suitable for use on vertical and porous substrates.

Permabond 2050

Permabond 2050 is a flexible cyanoacrylate adhesive, exhibiting improved peel strengths when compared to other grades.

Permabond Polyolfin Primer

Permabond Polyolefin Primer has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond Cyanoacrylate adhesives.

Permabond Double Bubble Epoxy

Permabond Double Bubble is a two-part epoxy adhesive in easy to use sachets that cures rapidly at room temperature. Plus, it's suitable for bonding a wide range of materials including metals, ceramics, woods, and even some plastics or composites.

Permabond ES550

Permabond ES550 is a single-part epoxy paste  which is slump-resistant (does not flow) during cure.

Permabond ES558

Permabond ES558 is a single-part epoxy paste which flows like solder when heated during curing.

Permabond ET500

Permabond ET500 is a two-part fast-setting epoxy adhesive which bonds to a wide variety of substrates such as wood, metal, ceramics and some plastics and composites.

Permabond ET5145

Permabond ET5145 1:1 mixable epoxy adhesive is high strength and has excellent environmental durability. It is suitable for applications where cured product is to come into contact with food or beverage.

Permabond ET5147

Permabond ET5147 2:1 mixable epoxy adhesive is FDA compliant, high strength and has excellent environmental durability.

Permabond ET515

Permabond ET515 is a semi-flexible toughened adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites.

Permabond ET5393

Permabond ET5393 1:1 mixable epoxy adhesive is ideal for bonding different materials where differential thermal expansion is anticipated.

Permabond ET5428

Permabond ET5428 thixotropic two-part adhesive has excellent resistance to impact and vibration. It has been found to provide exceptional performance even at elevated temperatures.

Permabond MS359 Grey

Permabond MS359 GREY is a single-part, moisture curing MS polymer adhesive.

Permabond 130UV

PERMABOND® 130UV is a low-viscosity, solvent-free, light cure cyanoacrylate adhesive that fluoresces under UV light. The UV light cure facilitates the curing, minimising the blooming effect, and allowing rapid bonding through transparent parts.

Permabond UV640

Permabond UV640 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbonate.

Permabond UV632

Permabond UV632 is a UV-curing adhesive developed for use on plastics. It has superb adhesion to acrylic and contains a long-wavelength photo initiator to allow it to cure through UV-stabilised plastics.

Permabond UV630

Permabond UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics.

Permabond UV625

Permabond UV625 is a single part, fast curing, UV curable adhesive with gel-like viscosity and good depth of cure making it ideal for use on vertical surfaces or where large gaps are involved.

Permabond UV610

Permabond UV610 is a single part, fast setting, UV curable adhesive designed specifically for bonding glass and metal.

Permabond UV620

Permabond UV620 is a single part, fast curing, UV curable adhesive with excellent optical clarity and resistance to yellowing. Ideal for bonding glass and crystal for a high quality finish.

Permabond 2K Primer Adhesion Promoter

Improves adhesion on metal, glass, plastics, and composites while helping identify surfaces ready for bonding. Helps protect metal from corrosion.

50ml Hand Gun Dispenser

This dispensing gun features a versatile, compact, durable, and well-balanced design providing trouble-free point-of-use dispensing.

Permabond Nozzle

Individual nozzles for the use with the 1:1 Ratio 50ml Permabond Adhesives.

Permabond Adhesive Dispensers

Dispensing applicators for the aid of dispensing 50ml Permabond Cartridges.