Condensation Cure Silicone Rubber
Also called tin-cure silicone, these are high-tear silicone rubbers that are known as the "work horse" of the industry because of their performance and economy.
Condensation cured silicone moulds are used for casting wax, gypsum, polymer modified gypsum, etc. but are best known for standing up to production casting of urethane, epoxy and polyester resins. Condensation cured silicones are also good for casting low temperature melt metal alloys.
Mold MaxTM Series
-
Mold MaxTM 10
Shore A 10 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 10T
Translucent tin cured silicone rubber - Shore A 10 hardness 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 14NV
Low viscosity, Shore A 15 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 15T
Translucent tin cured silicone rubber - Shore A 15 hardness 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 20
Shore A 20 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 25
Shore A 25 hardness tin cure silicone rubber. 100:5 mix ratio by weight - scale required.
-
Mold MaxTM 27T
Translucent tin cured silicone rubber - Shore A 27 hardness 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 29NV
Low viscosity, Shore A 29 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 30
Shore A 30 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 40
Shore A 40 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM 60
Heat resistant (up to 294°C/560°F), Shore A 60 hardness tin cure silicone rubber. 100:3 mix ratio by weight - scale required.
-
Mold MaxTM STROKE
Brushable, Shore A 30 hardness tin cure silicone rubber. 100:10 mix ratio by weight - scale required.
-
Mold MaxTM XLS II
Low shrinkage, tin cured silicone rubber - Shore A 30 hardness 100:10 mix ratio by weight - scale required.