Rebound 25

Rebound™ 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on moulds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound™ rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.

Rebound™ 25 is soft, flexible and is good for making moulds of models with deep undercuts. Depending on model configuration, Rebound™ 25 can be inverted as a glove moulds. Rebound™ 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound™ 25 and back it up with two coats of Rebound™ 40.

Advantages Over Urethane Brush-On™ Rubber:

• Rebound™ will not stick to most surfaces, so surface preparation is minimal
• Two liquids that mix easily together
• stands up better to production casting of resins and low temperature melt metal alloys
• has a long library life

4 thin layers are all that is necessary to make a flexible, strong and durable production mould for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound™ is a platinum silicone, it will last for many years in your mould library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.

Note: These products will not work with modeling clays containing sulfur under any circumstances.